BE Power Equipment 4,000 PSI - 4.0 GPM Hot Water Pressure Washer with Honda GX390 Engine and Belt Driven General Triplex Pump - PowerGen USA

HW4013HBG

Engineered for Longevity. Powered by Heat. Built for the Toughest Jobs.

When industrial-grade cleaning demands maximum durability, high heat, and relentless power, the BE Power Equipment HW4013HBG delivers without compromise. Featuring a belt-driven General triplex pump, a Honda GX390 engine with electric start, and a 12V diesel-fired Beckett burner, this unit is designed for professionals who expect the most from their equipment—every single day.

With 4,000 PSI at 4.0 GPM, a high-efficiency burner, and extended service life thanks to its belt drive system, this hot water pressure washer is your go-to solution for heavy-duty degreasing, equipment cleaning, and site sanitation in demanding commercial, agricultural, or industrial environments.

Why Hot Water? Because Cold Isn’t Always Enough.

Some messes need more than high pressure—they need heat. The HW4013HBG harnesses the cleaning power of hot water up to 200°F (93°C) using a 330,000 BTU Beckett burner to cut through grease, oil, and grime that cold water simply can’t handle.

The diesel-fired burner is powered by a reliable 12V ignition system and controlled via an adjustable thermostat and rocker switch, giving you total flexibility to clean with hot or cold water, depending on the job.

Belt Drive Advantage: Built to Go the Distance

Unlike direct drive units, the belt drive system in the HW4013HBG dramatically reduces pump RPM, vibration, and heat—key contributors to wear and tear. By lowering operating stress on the pump, the belt drive increases the service life of critical components, making it ideal for extended daily use in commercial applications.

This configuration not only provides quieter performance but also improved pump longevity, making it the preferred choice for professional cleaning crews, equipment operators, and mobile service businesses that rely on their washer day in and day out.

Legendary Honda GX390 Power with Electric Start

At the heart of this unit is the Honda GX390 389cc engine, an industry staple for good reason. Known for its bulletproof durability, smooth performance, and fuel efficiency, the GX390 starts easily and runs reliably under heavy load. With electric start functionality and a 55AH marine-grade AGM battery, you get dependable ignition in any condition—no pull cords, no downtime.

Honda's OHV design, precision camshaft, and cast iron sleeve construction ensure maximum engine life with minimal maintenance. It’s a workhorse—pure and simple.

General Triplex Pump: Industrial Strength from the Inside Out

The commercial-grade General triplex pump is a vital part of this unit’s high-performance package. Built for daily duty, it delivers reliable, high-pressure flow with exceptional internal design:

• Die-cast body for rugged structural integrity

• Forged brass manifold for corrosion resistance

• One-piece plungers for reduced seal wear and smoother operation

• Thermal release valve to prevent overheating

• Enhanced heat dissipation for continuous hot water use

Paired with an external unloader, the pump runs cooler and with less strain, ensuring peak performance and longer operational life even in high-demand environments.

Includes a brass air fitting that can be attached to the water inlet to use an air compressor to blow out the water out of the coil. This minimizes scale build-up, prevents freezing, and increases the life of the coil.

The actual product may vary from the images shown on the website.

SHIPPING INFORMATION
WEIGHT: 580LBS
UNITS PER PALLET:1
DIMENSIONS (LxWxH): 45"x33"x52"

 

 

Product Specifications

• Pressure: 4,000 PSI

• Flow Rate: 4.0 GPM

• Engine: Honda GX390 389cc with electric start

• Battery: 55AH marine AGM included

• Pump: General triplex – die-cast body, forged brass manifold, one-piece plungers

• Drive Type: Belt drive

• Unloader: External

• Burner: Diesel-fired 12V Beckett

• BTU Output: 330,000

• Temperature Control: Adjustable thermostat up to 200°F / 93°C

• Hose: 50-ft double-braided steel, quick-connect

• Spray Wand: 36” insulated with 5 QC nozzles

• Frame: Powder-coated steel roll cage

• Tires: Four 13” flat-free

• Oil Drain Hoses: 12” extensions for clean oil changes

• Air Purge Fitting: Brass air inlet to blow out coil

• Lift Point: Integrated in frame

• Mounting Brackets: Included for permanent installs

• Weight: 580 lbs

• Dimensions (LxWxH): 45" x 33" x 52"

• Units per Pallet: 1